Engine
PLEASE NOTE : If you want to change the order of the results, just click on the column heading, i.e. click on "Name" to view the products in alphabetical order by product name.
There are 183 parts in this category.
| Code | Name | Price | |
| 71.1070 | "O" RING FOR GEARBOX HIGH GEAR & TRIDENT OIL FILTER | £1.50 | |
| 57.4394 | 5 SPEED GEARBOX SPROCKET OIL SEAL HOUSING T150V/T160V | £10.00 | Image |
| 14.1302 | 5/16" UNF SELF-LOCKING NUT | £1.00 | Image |
| 83.5092 | AIR FILTER PAPER ELEMENT T160 MODELS 1975-1977 | £35.00 | Image |
| 70.8175 | ALLOY WASHER FOR ROCKER BOX INTERNAL ALLEN SCREW | £0.50 | |
| 70.8763 | ALTERNATOR ROTOR NUT A75/T150 | £3.75 | |
| 70.3975 | ALTERNATOR ROTOR TAB WASHER | £2.00 | Image |
| 70.6522 | ALTERNATOR STATOR MOUNTING STUD 3cyl A75/T150/T160 | £5.00 | |
| 70.9807 | ALTERNATOR WIRE CRANKCASE OUTER GROMMET | £6.50 | |
| 70.4144 | ALTERNATOR WIRE SEALING GROMMET | £2.00 | Image |
| 70.6584 | ANTI DRAIN VALVE HOUSING PLUG T150/T160/A75R | £5.00 | |
| 70.6567 | ANTI DRAIN VALVE SPRING ALL 3cyl | £2.00 | |
| 14.0208 | AUTO ADVANCE FIXING BOLT BOLT 1/4" UNF X 2.5" UNDER HEAD LONG | £1.00 | |
| 70.6026 | BEARING CIRCLIP (TRIPLE T/SIDE MAIN BEARING) | £2.50 | |
| 70.9023 | BIG END SHELLS .010" OVER SIZE | £33.00 | |
| 70.9024 | BIG END SHELLS .020" OVER SIZE | £33.00 | |
| 70.9025 | BIG END SHELLS .030" OVER SIZE | £33.00 | |
| 70.9026 | BIG END SHELLS .040" OVER SIZE | £35.00 | |
| 70.5998 | BIG END SHELLS STD 3cyl | £33.00 | |
| 70.8820 | BOLT ROCKER BOX TO CYLINDER BLOCK 4 9/32" LONG | £4.50 | |
| 70.8819 | BOLT ROCKER BOX TO CYLINDER BLOCK 4.5" LONG | £4.50 | |
| 21.0572 | BOTTOM ENGINE TO FRAME STUD 1970on T150 | £10.00 | |
| 70.1558 | CAMSHAFT PINION WOODRUFF KEY | £2.00 | |
| 60.0707 | CARBURETTER HOSE JUBILEE CLIP ALL 3cyl MODELS | £2.00 | |
| 70.9060 | CARBURETTER HOSE T150/T160/A75 | £6.50 | Image |
| 57.2580 | CLUTCH CENTRE SPLINED HUB (L F HARRIS) | £45.00 | |
| 57.2552 | CLUTCH PULL-ROD A75/T150/T160 STANDARD TYPE | £10.00 | |
| 57.2215 | CLUTCH THRUST OUTER WASHER T150/T160 (FITS IN OUTER PRI COVER) | £8.60 | |
| 60.3761 | CON ROD BOLT NUT (5/16"UNF) | £1.50 | |
| 70.9740/G | CON ROD T150/T160/A75 (GENUINE) | £130.00 | Image |
| 70.9727 | CONNECTING ROD BIG END BOLT ALL 3cyl GENUINE N.O.S. | £3.75 | |
| 70.1335 | COPPER WASHER 3/8" dia | £0.75 | |
| 70.8774 | CRANKCASE LOCATING DOWEL 3cyl | £2.00 | |
| 70.6580 | CRANKCASE SUMP SCAVENGE FILTER ALLOY COVER PLATE (N.O.S.) A75/T150/T160 | £20.00 | Image |
| 83.5434 | CRANKCASE TO AIR FILTER BREATHER HOSE T160 MODELS | £6.00 | Image |
| 70.1591 | CRANKSHAFT MAIN BALL BEARING (1.1/8" dia) RHP MADE IN UK | £39.50 | Image |
| 70.6577 | CRANKSHAFT OILWAY PLUG | £1.50 | |
| 70.1580 | CRANKSHAFT PINION WOODRUFF KEY | £2.00 | |
| 70.6524 | CRANKSHAFT TIMING PINION 3cyl | £48.00 | |
| 71.0280 | CYL HEAD/ROCKER BOX BOLT WITH EXTENSION FOR EARTH WIRE | £5.50 | |
| 70.8817 | CYLINDER BARRELL TO HEAD PILLAR STUD | £8.00 | |
| 21.0692 | CYLINDER BASE NUT (12 POINT) 3/8" unf 1969 on | £1.30 | Image |
| 70.6496 | CYLINDER BASE GASKET A75/T150/T160 | £5.00 | Image |
| 70.8751 | CYLINDER BASE HOLLOW DOWEL 3/8" | £2.50 | |
| 21.1931 | CYLINDER BASE STUD 1 21/32" o.a. | £3.50 | |
| 70.8738 | CYLINDER BASE STUD AT DOWEL 1 13/16" o.a. | £3.25 | |
| 21.1912 | CYLINDER BASE STUD STEPPED | £3.50 | |
| 82.2184 | CYLINDER HEAD BOLT WASHER (THICK 3/8") | £0.50 | |
| 70.9510 | CYLINDER HEAD TO EXHAUST PIPE SCREW IN STUB | £8.50 | Image |
| 70.6173 | DISTANCE PIECE FOR CRANKSHAFT PINION T/S T150/160 | £3.50 | |
| 21.0550 | DOMED NUT CHROME 3/8" unf (ROCKER SPINDLE etc) | £4.00 | Image |
| 70.1532 | DOWEL 1/4 OD CYLINDER AND HEAD | £2.50 | |
| 70.0402 | DRAIN PLUG FIBRE WASHER 3/8" i.d. | £0.50 | |
| 71.1452 | ENGINE BREATHER COVER GASKET T150/A75 | £1.50 | |
| 57.4875 | ENGINE BREATHER DUCT GASKET T160 | £1.50 | |
| 70.6506 | ENGINE PUSHROD EARLY A75/T150 (SMALL BALL PIN) | £10.00 | |
| 70.8038 | ENGINE SPROCKET ALIGNMENT SHIM .010" | £0.75 | |
| 71.2660 | ENGINE SPROCKET ALIGNMENT SHIM .030" | £0.75 | |
| 70.6523 | EXHAUST CAM NUT 1970 ONWARDS | £6.25 | |
| 70.6423 | EXHAUST VALVE A75/T150 (3.893" LONG) 1969-72 | £15.00 | |
| 71.3362 | EXHAUST VALVE T150/160 (3.669" LONG) 1973on | £13.50 | |
| 97.0430 | FIBRE WASHER 2BA (POINTS COVER & FORK DRAIN) | £0.50 | |
| 70.1670 | FIBRE WASHER PRESSURE RELEASE VALVE TO CRANKCASE | £0.75 | |
| 60.4247 | FLAT WASHER 5/16" | £0.20 | |
| 14.0254 | FRONT ENGINE BOLT OIL IN FRAME TWINS & T150 | £1.75 | |
| 14.0255 | FRONT ENGINE BOLT T160 7/16" X 4" unf | £2.00 | |
| 71.3941 | HEAD GASKET COMPOSITE T150/A75 | £9.50 | |
| 71.4250 | HEAD GASKET SOLID COPPER T150/T160/A75 | £25.00 | Image |
| 57.0989 | HOLLOW DOWEL 1/4" INSIDE DIAMETER | £2.50 | |
| 70.6523/I | INLET CAMSHAFT NUT ALL 3cyl MODELS | £5.25 | |
| 71.1446 | INLET MANIFOLD TO CYL HEAD GASKET T150 | £1.00 | |
| 71.3947 | INLET MANIFOLD TO CYL HEAD GASKET T160 | £1.00 | |
| 71.3948 | INLET MANIFOLD TO CYL HEAD TUFNELL INSULATOR T160 | £7.50 | |
| 70.8981 | INLET MANIFOLD TO HEAD INSULATOR (CARD TYPE) T150/A75 | £1.00 | |
| 70.8981/T | INLET MANIFOLD TO HEAD TUFNOL INSULATOR T150/A75 | £3.00 | |
| 70.6422 | INLET VALVE A75/T150 (3.975" LONG) 1969-72 | £15.00 | |
| 71.3361 | INLET VALVE T150/160 (3.734" LONG) 1973on | £13.50 | |
| 57.2166 | INSPECTION AND FILLER CAP SLOTTED TYPE (GENUINE NOS) | £4.50 | Image |
| 70.8782 | INSPECTION CAP "O" RING | £0.75 | |
| 71.2250 | INTERMEDIATE SPINDLE 1971on T150/T160 | £25.00 | Image |
| 70.6570 | LARGE "O" RING (INNER CHAINCASE AROUND OIL PUMP) | £1.50 | |
| 71.1129 | MAIN BEARING CAP LOCKWASHER (ALL 3cyl) | £2.00 | |
| 70.8745 | MAIN BEARING CAP STUD T150/T160/A75 (NOS) | £9.50 | |
| 70.6023/A | MAIN BEARING SHELLS std (USA MADE) | £50.00 | |
| 70.8780 | MAIN BEARING TIMING SIDE (ROLLER) ALL 3cyl | £33.50 | Image |
| 70.9027 | MAIN SHELLS .010" OVER SIZE | £33.00 | |
| 70.9028 | MAIN SHELLS .020" OVER SIZE | £33.00 | |
| 70.9028/A | MAIN SHELLS .020" OVER SIZE (USA MADE) | £50.00 | |
| 70.9029 | MAIN SHELLS .030" OVER SIZE | £33.00 | |
| 70.9030 | MAIN SHELLS .040" OVER SIZE | £33.00 | |
| 70.6023 | MAIN SHELLS STD 3cyl | £33.00 | |
| 14.0303 | NUT 3/8" UNF | £0.75 | |
| 14.0402 | NUT 5/16" THIN UNF (unf TAPPET ADJUSTERS) | £0.75 | |
| 21.0585 | NUT ENGINE SPROCKET T150/T160 & REAR WHEEL BOLT UP | £3.75 | |
| 70.6131 | OIL FILTER CAP FIBRE WASHER EARLY T150 & A75 | £1.00 | |
| 70.6571 | OIL FILTER CARTRIDGE (LONG ELEMENT) MADE IN ENGLAND BY OE SUPPLIER | £19.50 | Image |
| 71.1270 | OIL FILTER HOUSING CAP (GENUINE NOS) | £10.00 | |
| 70.6595 | OIL PRESSURE RELEASE VALVE 75-85lbs | £27.50 | |
| 70.6596 | OIL PRESSURE RELEASE VALVE DOMED CAP | £5.25 | |
| 60.3719 | OIL PRESSURE SWITCH PARALLEL THREAD | £8.00 | Image |
| 71.2930 | OIL PRESSURE SWITCH RUBBER COVER (SAME AS D2045) | £3.50 | Image |
| 60.2133 | OIL PRESSURE SWITCH TAPER THREAD | £8.00 | |
| 71.1351 | OIL PUMP P.O.A. | £0.00 | |
| 71.1442 | OIL PUMP GASKET A75/T150/T160 | £1.00 | Image |
| 71.1353 | OIL PUMP NUT TAB WASHER | £2.00 | |
| 70.4568 | OIL SEAL FOR TIMING COVER | £2.50 | |
| 70.4568/UK | OIL SEAL FOR TIMING COVER POINTS & CRANK UNIT TWINS (UK MADE) | £3.50 | |
| O.S.01 | OIL SEAL SET T150/A75 4 SPEED MODELS 1969-72 | £19.50 | |
| O.S.02 | OIL SEAL SET T150/A75 5 SPEED MODELS 1972on | £20.50 | |
| O.S.06 | OIL SEAL SET T160 MODELS 1975on | £25.50 | |
| 70.6840 | PISTON CIRCLIP A75/T150/T160 | £0.75 | |
| 70.6519 | POINTS COVER CHROME ALL MODELS | £20.00 | |
| 71.1441 | POINTS COVER GASKET A75/T150/T160 | £1.25 | |
| 70.6521 | POINTS COVER PILLAR BOLT | £2.00 | |
| 14.6608 | POSI HEADED SCREW 1/4"unc X 1" LONG | £1.00 | |
| 14.6610 | POSI HEADED SCREW 1/4"unc X 1.5" LONG | £1.45 | |
| 70.8754 | PRESSURE RELEASE VALVE CAP FIBRE WASHER GS254 | £0.75 | |
| 70.8752 | PRESSURE RELEASE VALVE PISTON | £3.50 | |
| 71.4251 | PRIMARY CHAIN ADJUSTER BOLT T160 | £4.50 | |
| 71.3974 | PUSHROD T160 | £7.00 | |
| 71.1238 | PUSHROD A75 & T150 | £7.00 | |
| 71.1190 | PUSHROD TUBE BOTTOM CUP PAPER GASKET | £0.75 | Image |
| 70.4752 | PUSHROD TUBE SEAL (WHITE) | £1.50 | Image |
| 70.4746 | PUSHROD TUBE SEAL BOTTOM CUP | £2.50 | Image |
| 83.1598 | REAR ENGINE PLATE SPACER L/H T150/T160 | £3.50 | |
| 71.2653 | REV COUNTER GEARBOX DRIVEN GEAR VERTICAL 1966 ONWARDS TWINS AND T.160 | £12.50 | |
| 99.3781/10 | RING SET .010" GENUINE N.O.S. AE A75/T150/T160 MODELS (3 PIECE OIL RING) | £55.00 | |
| 99.3782/20 | RING SET .020" GENUINE AE A75/T150/T160 MODELS (WITH SPRING INSIDE OIL RING) | £55.00 | |
| 99.3783/40 | RING SET .040" GENUINE N.O.S. AE A75/T150/T160 MODELS (3 PIECE OIL RING) | £55.00 | |
| 99.3780 | RING SET STD GENUINE AE A75/T150/T160 MODELS (WITH SPRING INSIDE OIL RING) | £55.00 | |
| 70.7651 | ROCKER ARM BALL PIN | £6.50 | |
| 71.0070 | ROCKER ARM BALL PIN (NO OIL HOLE) | £4.40 | |
| 14.6211 | ROCKER BOX CORNER BOLT 1/4" | £1.50 | |
| 70.8773 | ROCKER BOX TO HEAD GASKET (WIRED TYPE) | £5.50 | Image |
| 71.1445 | ROCKER INSPECTION COVER GASKET 3cyl | £2.50 | Image |
| 70.3253 | ROCKER SPINDLE "O" RING | £0.75 | |
| 70.1574 | ROCKER SPINDLE THACKERY (SPRING) WASHER 1/2" | £1.50 | Image |
| 70.1575 | ROCKER SPINDLE THRUST WASHER 1/2" dia | £0.75 | Image |
| 70.1330 | ROCKER SPINDLE THRUST WASHER 3/8" dia | £0.75 | Image |
| 70.8773/C | ROCKERBOX TO HEAD GASKET COPPER ALL 3cyl | £12.50 | Image |
| 70.8144 | ROTOR WOODRUFF KEY | £2.00 | |
| 70.3974 | ROTOR WOODRUFF KEY LONG TYPE | £2.00 | |
| 82.4715 | SCREW | £1.00 | |
| 57.2166/T | SLOTTED INSPECTION CAP REMOVAL & REFITTING TOOL (STAINLESS STEEL) | £7.50 | Image |
| 70.6130 | SPRING FOR OIL FILTER CARTRIDGE ALL 3cyl MODELS | £1.50 | |
| 70.9856 | STEEL SLEEVE FOR CRANKCASE "O" RING T150/T150/A75 | £5.00 | |
| 21.0686 | STUD CYLINDER BARREL TO HEAD OUTER A75/T150 | £2.75 | |
| 71.1444 | SUMP COVER GASKET A75/T150/T160 | £1.50 | Image |
| 71.1349 | SUMP FILTER COVER PLATE STUD 1/4" unc/unf T150/T160 | £1.50 | Image |
| T.150.04 | TAB WASHER SET R3/T150 4 SPEED | £25.00 | |
| T.150.05 | TAB WASHER SET T150 5 SPEED | £25.00 | |
| T.160.06 | TAB WASHER SET T160 | £25.00 | |
| 70.9706 | TACHO CABLE SUPPORT WIRE STAY A75 ROCKET THREE | £5.50 | Image |
| 71.4138 | TACHO DRIVE GEARBOX T160V (L/H THREAD INTO CRANKCASE) | £55.00 | |
| 71.3213 | TAPPET (CAM FOLLOWER) T150 & A75 | £42.50 | |
| 71.3358/M | TAPPET ADJUSTER | £4.50 | |
| 70.8783/M | TAPPET ADJUSTER MUSHROOM HEAD TYPE TO SUIT LONG VALVE | £5.25 | |
| 71.3358 | TAPPET ADJUSTER SCREW BALL ENDED 1973on (FOR SHORT VALVE) | £0.00 | |
| 71.3976 | TAPPET T160 (CAM FOLOLOWER) | £42.50 | |
| 70.9240 | THICK 5/16" FLAT STEEL WASHER | £0.35 | |
| 71.4078 | THROTTLE CABLE MECHANISM LINK LEVER T160 (GENUINE NOS) | £15.00 | |
| 70.9255 | THROTTLE LINKAGE ROD END CIRCLIP ALL 3cyl | £0.75 | |
| 71.3924 | THROTTLE STOP TICKOVER SCREW T150 (REPLACES 70.9252) | £5.00 | Image |
| 71.1348 | TIMING COVER GASKET BSA A75 | £5.00 | Image |
| 71.1350 | TIMING COVER GASKET T150/T160 | £5.00 | Image |
| 70.8762 | TIMING COVER PATENT PLATE T150/T160 | £6.00 | |
| 71.1440 | TIMING COVER STROBE PLATE COVER GASKET T150/T160 | £1.00 | |
| 70.6565 | USE 71.1445 | na | |
| 70.8917 | USE 71.3213 | na | |
| 99.0062 | USE 71.3748 | na | |
| 70.9972 | USE 71.3941 | na | |
| 71.3748 | VALVE COLLET (SPLIT COTTER) | £2.00 | |
| 70.6420 | VALVE GUIDE BRONZE INLET or EXHAUST UK MADE | £12.00 | |
| 70.6420/05 | VALVE GUIDE BRONZE INLET/EXHAUST +.005" O/SIZE | £12.00 | |
| 70.6420/10 | VALVE GUIDE BRONZE INLET/EXHAUST +.010" O/SIZE | £12.00 | |
| 70.6420/15 | VALVE GUIDE BRONZE INLET/EXHAUST +.015" O/SIZE | £12.00 | |
| 60.7363 | VALVE GUIDE STEM SEAL | £1.50 | |
| 70.8789 | VALVE SPRING BOTTOM COLLAR | £5.00 | Image |
| VS.3 | VALVE SPRING SET A75/T150/T160 1969on | £25.00 | Image |
| 70.8720 | VALVE SPRING TOP COLLAR | £5.00 | |
| 60.4245 | WASHER 1/4" dia (THICK) | £0.30 | |
| 70.8770 | WASHER 3/8" WITH SMALL OUTSIDE DIAMETER (BRAKE DISC BOLTS etc) | £0.50 | |
| 83.5168 | WIRING HARNESS CLIP T160 | £2.50 |
